Product(GTi)-IO Card | JAMMA Gaming | USB | IEEE 1394 | Series RS232 / 422 / 485

Features

72Pins JAMMA I/O Gold Finger
20Pins Power Input Gold Finger
Private Key for Security
256Kb FRAM Memory
3Pins for iBUTTON
5W/5W Amplifier

Specification

Datasheet

	Item	Description
	Dimension	185(W) x 70(D) mm
	Digital IO	72 Pins I/O Golden Finger (input: 35 pins/ output: 23 pins)
	Power IO	20 Pins Power Golden Finger 4 Pins D-SUB Power Connector
	Control IO	9 Pins 2.54mm USB Header for Data Control 24 Pins 2.54mm BOX Header for Debug and Burn Data 3 Pins Connector for iBUTTON iKEY Control 2 x 8 Bits DIP Switch
	Audio	5W + 5W Amplifier with VR 3Pins 2.54mm Header for Audio Input
	FRAM	256K bit Ferroelectric Nonvolatile RAM
	Security	Unique ID Mapping code limited 1-way Authentication SIC, Supported ECC 163 algorithms (option)
	EEPROM	64*16 bits

Features

Single-lane (x1) PCI Express
Support USB Battery Charging Specification
Compliant with Universal Serial Bus 3.0 specification
Supports 4 downstream ports for all speeds
Fully compliant with PCI Express Base Specification

Specification

	Item	Description
	PCI Express	Single-lane (x1) PCI Express throughput rates up to 5 Gbps
	Features	Fully compliant with PCI Express Base Specification Revision 2.0 Support USB Battery Charging Specification Revision 1.2 Compliant with Universal Serial Bus 3.0 specification Revision 1.0 Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices Supports the following speed data rates as follows: Low-speed (1.5Mbps) Full-speed (12Mbps) High-speed (480Mbps) Super-speed (5Gbps) Compliant with Intel?ˉs eXtensible Host Controller Interface (xHCI) Specification Revision 1.0 Supports 4 downstream ports for all speeds Built-in 4-pin power connector for receiving extra power supply from system Hot-swapping feature allows you to connect/disconnect devices without powering down the system
	System Requirements	Windows® XP/Vista/7/8/8.1/10 (32/64 bit) One available PCI Express slot (Recommend PCI Express 2.0)

Features

Support 2 ports of USB3.1
Compliant with PCI Express Base 3.0 Specification
Compliant with USB Specification Revision 2.0
Compliant with USB 3.1 Specification
Support 12V/3A (36W) PD source on c port

Specification

	Item	Description
	PCI Express	PCI Express x4 signal
	Features	Support 2 ports of USB3.1 Support PCI Express Gen2 x2 or Gen3 x1 Compliant with PCI Express Base 3.0 Specification Compliant with USB Specification Revision 2.0 Compliant with USB 3.1 Specification Revision 1.0 Compliant with eXtensible Host Controller Interface (xHCI) Specification Revision 1.1 Up to 10Gbps Bandwidth Performance with Low Latency Backward Compatible with USB 3.0/2.0/1.1 Interface Compliant with USB Power Delivery 2.0 and USB Type-C Revision 1.2 (model dependent) USB Type-C Power Delivery port for charging notebook, tablets or smartphones (model dependent) Support Over Current Detection Support 12V/3A (36W) PD source on c port 15-pin SATA Power Connector or 2x4 Auxiliary Power Connector (model dependent)
	System Requirements	Windows® 7/ 8/ 8.1/ 10 (32/64 bit) MacOS 10.10 or later Linux 3.5 or later One available PCI Express slot (x4, x8, or x16)

Features

Supports hot-swapping and Plug-n-Play connection of peripheral devices
Supports data transfer rates of 100, 200, 400 and 800 Mbps

Specification

	Item	Description
	PCI Express	PCI Express x1 signal
	Features	Provides two FireWire 800 (1394b) ports and one 1394a (6-pin) port for multiple 1394b/1394a devices connections Built-in 4-pin power connector provides extra power when connected to the system Supports hot-swapping and Plug-n-Play connection of peripheral devices Works with various types of FireWire 800 (1394b) and 1394a devices Support Windows® 2000/XP/Server 2003 SP1 or above Supports data transfer rates of 100, 200, 400 and 800 Mbps
	System Requirements	Windows® XP/Vista/7/8 /10 /10 (32/64 bit)

Features

Compliant with PCI Express Base Specification 1.1
Supports x1, x4, x8, x16 (lane) PCI Express
Built-in 16C950 compatible UART
RS-422/485 4-Port

Specification

	Item	Description
	PCI Express	PCI Express x1 Signal
	Features	Compliant with PCI Express Base Specification 1.1 Supports x1, x4, x8, x16 (lane) PCI Express Bus connector keys Built-in 16C950 compatible UART 128-bype deep transmit/receive FIFOs Serial communication speeds up to 1Mbps RS-422 and RS-485 auto detect and switching Low profile form factor ±15KV ESD protection on all signal pins Plug-n-Play, I/O address and IRQ assigned by BIOS
	System Requirements	Windows® XP/Vista/7/8/10 (32/64 bit) Linux 2.6.x/3.x

Features

2KV isolation protection
±15KV ESD protection
RS-422/485 2-Port

Specification

	Item	Description
	PCI Express	PCI Express x1 Signal
	Features	Compliant with PCI Express Base Specification 1.1 Supports x1, x4, x8, x16 (lane) PCI Express Bus connector keys Built-in 16C950 compatible UART 128-bype deep transmit/receive FIFOs Serial communication speeds up to 1Mbps RS-422 and RS-485 auto detect and switching Low profile form factor ±15KV ESD protection on all signal pins 2KV isolation protection for all signal and power (Isolation version only) Plug-n-Play, I/O address and IRQ assigned by BIOS
	System Requirements	Windows® XP/Vista/7/8/10 (32/64 bit) Linux 2.6.x/3.x

Features

Two 10/100/1000Mbps compatible RJ-45 Ethernet ports
UDP, TCP and IP checksum offloads
Interrupt throttling control
Support for most network operating system (NOS)
Support Wake On Lan (WOL) power management

Specification

	Item	Description
	PCI Express	PCI Express x4 Siganl
	Features	Designed to meet PCI Express Specification Revision 2.1 Four lane (x4) PCI Express compatible with x4, x8 and x16 PCI Express slots Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3ad (link aggregation), IEEE 1588 (time sync) / 802.1AS, IEEE 802.1q (VLAN tagging) 10/100/1000M data auto-negotiation Load balancing on multiple CPUs Receive Side Scaling (RSS) UDP, TCP and IP checksum offloads UDP and TCP Transmit Segmentation Offloading (TSO) Interrupt throttling control Support for most network operating system (NOS) Intel PROSet Utility for Microsoft Device Manager Advanced cable diagnostics Teaming support Multiple teams Jumbo Frame support Support Wake On Lan (WOL) power management Feature full duplex mode that doubles the network connections speed
	System Requirements	Windows® XP/Server 2003/Vista/Server 2008/7/Server 2008 R2/8/Server 2012/8.1/Server 2012 R2/10 (32/64 bit) Linux 2.4.x or later

Features

10Gbase-T network card (NIC)
Up to 20Gbps (full duplex) bandwidth
Up to 9K jumbo frame support
two 100Mbps/1G/2.5G/5G/10G compatible RJ-45 ports
Designed to meet PCI Express Specification Revision 3.0

Specification

	Item	Description
	PCI Express	PCI Express x4 Siganl
	Features	two 100Mbps/1G/2.5G/5G/10G (NBASE-T in Linux only)compatible RJ-45 Ethernet ports Compliant with 10GBase-T and NBASE-T specifications Fully compliant with IEEE 802.3an, IEEE 802.3ab, IEEE 802.3u Up to 20Gbps (full duplex) bandwidth Up to 9K jumbo frame support Designed to meet PCI Express Specification Revision 3.0 Four lane (x4) PCI Express compatible with x4, x8 and x16 PCI Express slots
	System Requirements	Windows 7 \| 8 (32/64-bit) \| 10 (64-bit) \| Windows Server 2008 R2 \| Windows Server 2012/R2 Linux 2.6.24 or later VMware ESXi 5.x/6.0

Features

Supports 10G/5G/2.5G/1G/100M
PCI Express Gen-2 x4 Host Bus interface
EEE (Energy Efficient Ethernet)
9K Jumbo Frames
IP, TCP, UDP checksum offloading

Specification

	Item	Description
	PCI Express	PCI Express x4 Siganl
	Features	Supports 10G/5G/2.5G/1G/100M Runs up to 10G at 100m Cat 6A cable and 5G at 100m Cat 5e/Cat 6 cable Backward compatibility with 1000Base-T, 100Base-T Networks PCI Express Gen-2 x4 Host Bus interface EEE (Energy Efficient Ethernet) 9K Jumbo Frames IP, TCP, UDP checksum offloading IEEE 802.1Q Tagged VLAN Virtual NIC support
	System Requirements	Windows 7 \| 8 (32/64-bit) \| 10 (64-bit) \| Windows Server 2008 R2 \| Windows Server 2012/R2 Linux 2.6.24 or later VMware ESXi 5.x/6.0

Ginterm Intelligent Co., Ltd. All Rights Reserved.